- PRODUCTS
-
SEALANT & SLEEVE
-
SEALANT & SLEEVE
-
SEALANT & SLEEVE
SEALANT & SLEEVE
Specialist supplier of marine valves.
ESST System
- Every Product Composition - Halogen - Free Type / Low Smoke
- Fire-Resistance Test Passed (IMO Res.A.754(18) A-60 Class)
- Perfect Finishing with Sealant (Protect from water and harmful gas)
AV-810 Sleeve
- Prduct Type: NFRT(Non-halogen Fire Resistance Tube)
- Main Material: Olefin Resin
- It is possible to leave regular intervals as much as sleeve thickness between cables
- Fire-Resistance, Halogen Free, Low Smoke are excellent
- Supply variety sizes according to cable size
- Covering laid cable and insertion to inside tube are easy
* Filler sleeves are supplied non-split ease of filling
| Sleeve | Cable diamentr(mm) | Sleeve(A) | Wall | |
|---|---|---|---|---|
| type | Interior | Exterior | Length(mm) | Thickness(mm) |
| 6/12 | 5 | 7 | 140 | 3 |
| 8/14 | 7 | 9 | 140 | 3 |
| 10/16 | 9 | 11 | 140 | 3 |
| 12/18* | 11 | 13 | 140 | 3 |
| 14/20 | 13 | 15 | 140 | 3 |
| 16/22 | 15 | 17 | 140 | 3 |
| 19/27* | 17 | 21 | 140 | 4 |
| 23/31 | 21 | 25 | 140 | 4 |
| 27/35 | 25 | 29 | 140 | 4 |
| 31/39 | 28 | 33 | 140 | 4 |
| 36/46 | 33 | 39 | 140 | 5 |
| 42/52 | 39 | 45 | 140 | 5 |
| 48/64 | 45 | 51 | 140 | 5 |
| 54/64 | 51 | 57 | 140 | 5 |
| 60/70 | 57 | 63 | 140 | 5 |
| 68/78 | 63 | 71 | 140 | 5 |
AV-810 Sleeve: non-toxic, halogen free components
- For the AV-810 insert and filler sleeves, a special rubber compound was developed Known as FRR/LEHF(fire resistant rubber/low grade of expansion, halogen free).
When this rubber is exposed to fire or temperatures in excess of 200°C it expands five to ten times its original volume. During the expansion of the rubber a carbonized mass is formed, which has good properties of thermal insulation.
- The FRR/LEHF rubber is absolitely HALOGEN FREE. Furthermore the FRR/LEHF rubber has a low smoke index(NES 711 : Issue 2:2000) and a very high oxygen index(ISO 4589-2:1996).
- The wall thickness of the sleeves is so chosen as to satisfy the requirements governing adquate separation of the cables.
AP-910 Sealant
- Prduct Type: NFRS(Non-halogen Fire Resistance Sealant)
- Main Material: Room Temp. Curing Silicone Resin
- High viscosity doesn't make any pollution by reason of dropping down
- Be in safekeeping with sealed containers
- Finishing by filling at both exposed tube ends
- Fire-Resistance, Halogen Free, Low Smoke are excellent
Product Information
| Color | Dark gray |
|---|---|
| Specific gravity | 1.15 +0.03 g/cm |
| Curing of top layer | 1-2 hour |
| Service temperature | -50°C up to +160°C |
| Tensile strength | approx. 0.81 Mpa |
| Elongation at break | approx 230% |
| Hardness | 33 Shore A |
| Elastic deformation | approx. 25% |
| Fire class | IMO Res. A.653(16) |
| Ageing | Up to 50 years service life |
| Supplied in | Cartridges, containing 310 ml |
| Storage | To be stored cool and dry min/max temperature = +5/+30C |
| Storage life | Approx. 12 months |
AP-910 Sealant : Water-repellent, High bonding strength, Weathering, UV and Ozone resistant.
- AP-910 is a fire-resistant sealant based on a single componet silicone compound
- In the event of fire or at temperatures in excess of 200°C the sealant expands to about five to ten times its original volume. During this process a porous mass is formed, which has excellent thermal insulation properties. In contrast to conventional materials that swell under severe heat exposure, the expansion of AP-910 sealant is not caused by intumescence, but by a chemical process(Intumescence means the occurrence of volume enlargement under the effect of heat, caused by the surface structure being inflated by fumes originating from the product). The advantage of this is that the expansion of AP-910 of not addonpanied by formation of large amounts of fumes.